.Needle Valve – A Metering Valve

Needle valves are control volume valves that limit flow in little lines. Fluid moving via the valve turns ninety degrees and movements via an orifice that supports as the seat. The orifice size replaces when the user positions the cone in link to the seat. Needle valves are equal to globe valves in that they share a few design specs and have similar advantages, for example, both globe valves and needle valves empower operators to replace flow rate using a threaded turning stem. The difference between globe valves and needle valves https://www.kp-lok.com/product/needle-valves is the care that needle control devices can achieve. Actually, needle valves are a perfect choice for calibration application for the reason they are capable of being fine-tuned.

Needle valves can give right shutoff in order to permit gauges and other measurement tools to be installed or removed safely. That is also why needle control devices may be applied in a variety of industries, from biofuels to petrochemicals. It is the needle valve perfectly-threaded valve stem that provides it an important mechanical benefit by permitting operators to seal it using only minimal force. One drawback of needle valves, anyway, is that they illustration inspect alone is not sufficient to decide whether a needle valve is closed or open.

Flow control devices are very important parts in a huge variety of industries. Planning which flow control valve type is top for your specific condition depends on a number of criteria, but the most generally used kinds include globe valves, gate valves, diaphragm valves, pinch valves, and needle valves.

Types of needle valve body designs

One kind of body design for a needle valve is the bar stocky body. Bar stock bodies are very common, and, in types of global, a ball swiveling in the stem gives the necessary turning round for seating without break.

One benefit of needle valves is perfect flow adjustment they provide. Needle valves are continually used as metering control devices. Metering control devices are used for very perfect flow manage. The orifice or think disk permits for linear flow features in metering valves. So, the number of hand wheel turns can be directly correlated to the flow amount. Needle valve feature should match the application where valve is going to be installed.

A typical meeting valve has a steam with forty threads per inch. Needles valves commonly use 1 of 2 styles of packing stem: O-ring with TFE packing cylinder or TFE backing rings. Needles valves are generally equipped with replaceable seats for ease of valve maintenance.

How to pick needle valve


The working force  is a vital factor in picking the best needle valve. Robust needle valve can manage force of up to 4000-5000 psi at 100 F. When still higher forces are needed, high performance valves are accessible that can handle up to 10000 psi force at 100F.


Different stuffs are used in needle valve construction. The generally used materials contain brass, 316 or 304 stainless steel, Alloy four-hundred and carbon steel.

Stainless steel is largely used for its corrosion durability, chemical solidity and top temperature resistance. Brass needle control devices are applied in hydraulic systems, gas piping and top temperature applications.  Alloy 400 is used for its top strength. Corrosion resistance and used mainly in chemical and marine processing applications.




Leave a Reply

Your email address will not be published. Required fields are marked *